نتایج جستجو برای: Al/Al2O3 composites

تعداد نتایج: 45835  

Journal: :journal of ultrafine grained and nanostructured materials 2014
alireza abdollahi ali alizadeh

in this study, ultrafine grained 2024 al alloy based b4c particles reinforced composite was produced by mechanical milling and hot extrusion. mechanical milling was used to synthesize the nanostructured al2024 in attrition mill under argon atmosphere up to 50h. a similar process was used to produce al2024-5%wt. b4c composite powder. to produce trimodal composites, milled powders were combined w...

Journal: :علوم و تکنولوژی پلیمر 0
مهرداد محمود شکریه سامان صفری دیناچالی

applications of thermoplastic composites have developed extensively. the thermoplastic composites in comparison with the thermoset composites have many advantages. thermoplastic composites can be melted and remolded many times. the duration of manufacturing process of these composites is short, producing very tough material, and the welding ability and multiple recyclings are their further adva...

Journal: :journal of mechanical research and application 2011
reza eslami farsani seyed mohammad reza khalili vahid daghighi reza fazaeli

the creep behavior of basalt fiber reinforced epoxy (bfre) and glass fiber reinforced epoxy (gfre) composites was studied through tensile testing at high temperature. to study the effect of reinforcing epoxy, the micro glass powder (mgp) was added at various volume percentage into the epoxy resin in bfre composites. the initial strain for all the specimens were evaluated and compared with each ...

Journal: :international journal of iron & steel society of iran 2009
f. madadi m. shamanian f. ashrafizadeh

this paper deals with the investigation of the microstructure and hardness of steel samples cladded with satellite 6-wc composites by using gas tungsten arc welding (gtaw) process. for this purpose, steel samples were coated with unreinforced and reinforced stellite (by 20, 30 and 40 wt.% wc). the cladded samples were evaluated by metallographic studies, microhardness measurement and x-ray diff...

Journal: :journal of particle science and technology 0
aboutaleb ghadami jadval ghadam departments of chemical & petroleum engineering, yasooj branch, islamic azad university, yasooj, i.r. iran

in this research, the influence of adding micro- and nano- sized calcium carbonate powders to nylon-66 was investigated. mechanical properties of micro and nano- composites, including tensile strength, elongation, and young’s modulus, before and after ageing, were determined and analyzed. for this purpose, micro- and nano-sized caco3 particles were used as fillers to prepare micro-composites (c...

Journal: :علوم و تکنولوژی پلیمر 0
محمود مهرداد شکریه وحید نصیر

a new model is proposed in this research to calculate the longitudinal strengthof unidirectional e-glass reinforced polymer composites exposed to sulfuricacid environment, using a micromechanics model. in the proposed method,it is assumed that the residual strength of the degraded composites under acidic environment can be calculated by knowing the degraded strength properties of the constituen...

Journal: :international journal of nano dimension 0
z. zhang department of biomedical engineering, tampere university, tampere, finland. b. fazeli department of biomedical engineering, tampere university, tampere, finland.

hydroxyapatite is a biocompatible ceramic and reinforcement for bone implantations. seva/hap composite content hap filler with difference particle sizes were designed. mechanical tests like tensile modulus, uts, strain at break and biodegradation were investigated. results illustrated much increase tensile modulus of composites content hap nano powders ratio to micro powders. also uts analysis ...

Journal: :Dental materials journal 1994
S Hirano T Hirasawa

The compressive creep and the recovery of commercially available composites, 2 kinds for posterior and 2 kinds for anterior use, in water were examined. In posterior composites, creep strain after 500h at a stress level of 8.3 kgf/mm2 was significantly small (within 1%). The results of the compressive creep test showed that posterior composites would be resistant to occlusal stress. Creep strai...

Journal: :جنگل و فرآورده های چوب 0
علیرضا سوخته سرائی دانشگاه تهران سحاب حجازی دانشگاه تهران- دکترا لعیا جمالی راد دانشگاه گنبد کاووس محمد احمدی دانشگاه تهران سید بهنام حسینی دانشگاه تهران

in this study , the physical and mechanical properties of polypropylene composites reinforced with bagasse alkaline-sulfite-anthraquinone, soda-anthraqouinone, monoethanolamine-anthraquinone chemical pulps and mechanical pulp (cmp) known as pulp-plastic compostes (ppc) were investigated and the results were compared among ppcs and with polypropylene composites reinforced with bagasse flour know...

B. Fazeli Z. Zhang,

Hydroxyapatite is a biocompatible ceramic and reinforcement for bone implantations. SEVA/HAP composite content HAP filler with difference particle sizes were designed. Mechanical tests like tensile modulus, UTS, strain at break and biodegradation were investigated. Results illustrated much increase tensile modulus of composites content HAP nano powders ratio to micro powders. Also UTS analysis ...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید